If the fuel system in your car is dirty, you will be wasting gas and losing performance as you drive around Apple Valley Minnesota.
Unless you drive a vintage car, you have fuel injectors. They need to be properly maintained. That is why your owner’s manual has a schedule for cleaning your fuel injectors and other parts of your fuel system.
Your service technician at Valley Auto Care has the tools and chemicals to do the job right. Valley Auto Care uses a process that gives your car a deep, professional fuel system cleaning. The particles, gum and varnish that build up in your fuel system are removed so that it can run cleanly and efficiently.
After a professional fuel system cleaning, you’ll notice more power, better gas mileage and reduced exhaust emissions. AutoNetTV strongly recommends you follow your manufacturer’s fuel system cleaning service recommendations to keep your vehicle running strong.
It’s expensive to replace a fuel injector that’s been damaged by neglect. Check with your service technician at Valley Auto Care and see when your car is scheduled for a fuel system cleaning.
Auto Service Resources.
Videos and articles designed to help you diagnose and maintain your vehicle.
Archive for December 2010
Clean Fuel Makes a Happy Engine In Apple Valley Minnesota
Date: December 28, 2010 11:59 AM - Category: Fuel System
Apple Valley Tire Repair
Date: December 23, 2010 10:56 AM - Category: Tires and Wheels
Most folks around Apple Valley have had a flat tire. You know it’s inconvenient and a pain. Our tires are important. Keeping them in good working order isn’t just a big safety issue – it also has a financial impact. With high gas prices, we’ve all heard about the importance of keeping proper tire pressure to save on gas. In addition, proper inflation promotes even tread wear so your tires last longer.
There’s another danger to under-inflated tires. Low tire pressure puts added stress on the structure of the tire itself, causing it to break down prematurely. Also, under-inflated tires generate more heat which also reduces tire life. So get those slow leaks fixed quickly – don’t just keep airing them up every few days. You want to avoid serious tire damage.
Tires can also be damaged by road hazards in and around Apple Valley. Punctures, cuts and impacts on curbs or potholes can also cause damage that could lead to tire failure. Sometimes, it’s something that a visual inspection would reveal. Take the opportunity to check your tires when you’re gassing up. Look for slashes, missing chunks, nails or screws in the tread or just uneven wear. Of course check the air pressure too.
Now tire damage can be on the inside where you can’t see it until it’s removed from the wheel. Such damage could come from a severe impact, driving on a flat or even just low pressure. Some punctures can cause internal damage that are too severe to be repaired. You may see our Valley Auto Care professionals take the time to remove your flat from the rim and inspect the inside before repairing it, which means we're just following good procedure.
Now some tires just can’t be repaired. A puncture may be too large to plug. Also, the puncture could be in a location that’s not safe to repair like in the sidewall or outer portion of the tread. So called run-flat tires should not be repaired because their design is such that internal damage can’t be detected by a visual inspection.
It is also important that repairs should only be done by a qualified tire specialist like the ones we have at Valley Auto Care. You can buy self repair kits – save those for emergencies, like when you’re off-roading and need a quick fix so you can hobble back to civilization and get professional help. If you need to use a repair-in-a-can product, remember it’s a temporary measure only and your tire needs to be properly repaired as soon as possible.
Here are some other considerations: Repairing a flat may void your tire manufacturer’s warranty – just something to keep in mind. Also, if you repair a speed rated tire, you should not use it in any motorsports or operate it above legal speed limits. Your tire professional will repair your tire whenever it’s safe to do so and he’ll advise you when it’s better to replace it. So watch those curbs and keep the air – on the inside.
Valley Auto Care
7125 151st St. West, Suite 105, Apple Valley, Minnesota 55124
Before You Leave Apple Valley, Get A Trip Inspection
Date: December 16, 2010 11:42 AM - Category: Maintenance
You know, at Valley Auto Care we get a lot of people asking about how to prepare their car for a trip. That’s a big deal. You could be driving through mountains and deserts in some pretty lonely areas outside of Apple Valley so you may be anxious to know that the car is up to the task and won’t leave you stranded.
You really do need to plan ahead for a major road trip – there are a lot of things to get ready. Where should you start? You could start with the tires. Look them over for tread wear and check to see that they are properly inflated. Take a quick test drive around Apple Valley to see if you can feel any vibrations: are the wheels are in balance? Is the car tracking straight? Is the alignment ok?
Come in and see us for trip inspection.
Valley Auto Care
7125 151st St. West, Suite 105
Apple Valley, Minnesota 55124
The next thing is a full service oil change to make sure all of your fluids are topped off and you have fresh oil for the trip. And if your car has over 75,000 miles, you may consider putting in the high-mileage formulation to clean harmful sludge deposits in the engine. You may also need a new PCV valve and an engine air filter.
How about your transmission and brakes? Have you had your transmission and brakes inspected in the last six months?
How are your wiper blades? There’s nothing like not being able to get rid of the bug juice on a long road trip away from Apple Valley.
Check your owners’ manual for any other recommended service and have Valley Auto Care do the multi-point inspection before you head out.
Consider also having the coolant system serviced – you want to stay within the manufacturer’s recommendations. If you’re towing a trailer you’ll want to be keep in mind that you’ll be going a long way under severe conditions.
A lot of folks overlook severe conditions like towing, or summer heat, or driving on dirt roads. Plan ahead for your next road trip – we want you to get there and back.
Check Engine Light
Date: December 7, 2010 3:05 PM - Category: Dashboard
Did you know that today's cars carry more computer power than the Apollo 121 Lunar Module that landed on the moon in 1969? New cars have as many as 12 networked computers and over five miles (eight kilometers) of wiring. In fact, for the last decade or so, computers have been controlling about 85% of your vehicle's functions.
Cars have sensors for manifold air temperature, coolant temperature, manifold air pressure, airflow, throttle position, vehicle speed and oxygen content. All of this electronic wizardry is pretty complicated. So how do you know when there is a problem?
It's simple - the Check Engine light comes on. The computer monitors all the sensors and uses that information to decide what to adjust such as the fuel mix, spark timing and idle speed. In addition, the computer monitors its own circuits. When it finds a fault, it turns on the Check Engine light and stores a trouble code in the computer.
It can be pretty disturbing when the Check Engine light comes on. We wonder just how urgent it is. Generally speaking, it is not critical like a temperature or oil pressure light. When you get one of those it means STOP NOW! When the Check Engine light shows up, you should get to your Apple Valley automotive service center to find out what the matter is as soon as possible.
Since 1996, there has been a strong emissions control component to the Check Engine diagnostic. But if your Check Engine light flashes on and off, you know that it is more urgent and you need to get it checked immediately to prevent damage. You should slow down and avoid towing or heavy loads until you can get it checked out.
The automotive technicians at Valley Auto Care have special diagnostic equipment that will retrieve the trouble code from the computer and help determine what is wrong. From there, they can fix it and get you back on the road.
Stop It! You Need Good Brakes
Date: December 3, 2010 3:05 PM - Category: Brakes
Good brakes are obviously very important. If you've ever had your brakes go out while you're driving around the Apple Valley area, you'll know how terrifying it can be. Today we'll focus on how to tell when you have a brake problem, and how to make good repair choices.
Often, the first indication that something's wrong with the brakes is an unusual sound. It could be a squeal, chatter or grinding sound.
Some brake pads have a little piece of metal embedded in them that will make a squeal or chirping sound when the brake pads have been worn down to the point that they need to be replaced. It's an early warning indicator.
When you hear that sound, schedule an appointment at Valley Auto Care soon.
Now a chattering sound is more urgent. That usually indicates that something is loose. It could be a brake pad or even the brake calipers. If one of those parts falls off, you could have some serious trouble stopping the vehicle. It would be a good idea to park it until you can get into the shop.
A grinding noise usually means that the brake pad is completely worn away and the metal parts of the brake are rubbing directly on the metal brake rotor. That means the rotor is being damaged and will need some work. More on that later.
Another warning sign is that your brake pedal may feel soft and spongy – or it may even feel very hard to push in. Both could mean trouble. And of course, you may get a dashboard brake warning light.
Now when it comes time to replace your brake pads, you have a choice to make. You can get the same pads that came standard on your vehicle. You can expect the same performance and durability as with the pads that came on the car from the factory.
Now you can also get a budget brake pad. Sometimes drivers insist on lower cost pads. That's OK if the budget demands it, but you need to be aware of the trade offs. Lower grade pads are usually noisier, so you'll have to live with more noise when you apply the brakes. They also tend to generate a lot more brake dust, you know, that black dust that accumulates on your wheels. And they probably won't last as long either. In our opinion, that's a lot of compromise for just a few dollars in savings.
You can also choose to buy premium brakes pads. These perform at higher specifications than the factory pads. You can expect quieter operation, less brake dust and better stopping power.
Now, getting back to the rotors. The rotors are the discs that the brake pads clamp down on to stop the vehicle. If you've been driving with completely worn brake pads, you've scratched grooves into the rotors. If the grooves aren't too deep, the rotor can be resurfaced. A thin layer of metal is cut off the surface of the rotor to make it smooth again.
Now, if the grooves are too deep or if the rotor has already be resurfaced before, there may not be enough material to resurface and still have a rotor that's thick enough to safely stop the vehicle. In that case, the rotor will have to be replaced.
Something that's often overlooked is the brake fluid. Your manufacturer has a recommended schedule for evacuating the old brake fluid, cleaning the system and refilling it with fresh brake fluid. This is really important to brake performance.
So here's the bottom line: if you suspect, inspect. If you notice any of these warning signs, have your brakes inspected. Your advisor can help you make the repair decision that's right for you.